Extreme: Severe dirt and grime soiling, heavy oxidation, accumulated BBQ stains and or tree Sap build up.

1. Dilute 1 part Composite Bright to 4 parts water by volume.
2. Pre-wet composite surface with fresh water
3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 min. For stubborn stains allow 5 – 10 min
4. Scrub surface with a stiff broom or mechanical agitator
5. Thoroughly rinse off with water

Moderate: Removal of dirt, light oxidation, fresh BBQ stains and light build-up of tree sap.

1. Pre-wet area to be cleaned with fresh water.
2. Dilute 1 part Composite Bright to 8 parts water by volume.
3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 min. For stubborn stains allow 5 – 10 min
4. Scrub surface with a stiff broom or mechanical agitator
5. Thoroughly rinse off with water

Light: General cleaning and up-keep.

1. Dilute 1 part Composite Bright to 10 parts water by volume.
2. Pre-wet composite surface with water
3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 min. For stubborn stains allow 5 – 10 min
4. Scrub surface with a stiff broom or mechanical agitator
5. Thoroughly rinse off with water

Coated Composite: General cleaning and up-keep.

1. Dilute 1 part Composite Bright to 20 parts water by volume.
2. Pre-wet composite surface with water.
3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 minutes. For stubborn stains allow 5-10 minutes.
4. Scrub the surface with a soft bristle broom.
5. Thoroughly rinse off with water.

It is recommended that composite wood be treated with Composite Bright at least every 3 to 6 months depending on location and density of surrounding trees and native wildlife. For areas exposed to heavy soiling, frequency of treatment will need to be at shorter intervals to maintain a natural looking substrate. For improved protection against stains and fungal growth refer to Aqualis Composite Sealer.